aluminum die casting with sand core Manufacturers

Custom Sand Casting Company. Aluminum sand casting is one of the fastest and most cost-effective casting methods adopted in the production of low volumes of aluminum casting parts, as tooling cost is very low. The parts are available to weigh from less than a pound to thousands of pounds.

Advanced A356 Aluminum Casting Suppliers. The aluminum alloy ingots of A356 are heated to more than 700 degree in furnace, remove out of the impurities on the top. Poured them into the special mold, then you will get its casting.A356 aluminum casting parts are widely used in automobile, medical device, parts, aerospace industry, etc.

Quality Aluminum die casting is a manufacturing process for producing accurately dimensioned, sharply defined, smooth or textured-surface aluminum parts through the use of reusable molds, called dies.

Quality Low Pressure Aluminum Casting Suppliers. Low pressure aluminum casting is the most economical solution for the production of high quality aluminum parts. The molten aluminum alloy slowly fills the die by low pressure air, which is easy to control the air of pressure, to reducing turbulence and get very good quality casting parts.

Custom Permanent Mold Casting Manufacturers. Permanent mold casting of aluminum casting is a metal casting process. The process of sand casting is an expendable, its mold will be destroyed after each cycle. The molten aluminum liquid is poured in a mold which is clamed shut until they cools and solidifies into the desired part shape. The mold will be destroyed when you move out the parts from its mold.

Customized Zinc Die Casting Suppliers. Zinc die casting process is fast-cycling hot chamber die casting process. it utilizes a component called a gooseneck that is submerged in a furnace filled with molten metal. Metal automatically enters the shot chamber through a hole in the gooseneck. A vertical plunger then seals the hole and drives the metal into the back of the die with high pressure. There are one or more cavities, each an exact inverse replica of the parts, the quick chill and rapid solidification take place when the molten metal comes into contact with relatively cool steel. The part is ejected from the tool.